Our Products

products video

Technical parameters

Working voltage: AC220 V / 50 Hz
Working pressure: 4-6kg / cm
Motor power: 10W
Twisted wire length: 5-60mm
Weight: 10kg
Dimension: 340 * 190 * 170

The machine is easy to use and easy to operate. It can tighten all kinds of ground wires, braided net wires and isolation wires, and make them complete Instead of manual work.

Characteristic

1.The automatic gripper adopts an exposed design, so that the scattered copper wires can be easily placed.
2.Elastic clamping, when the wire diameter is different, there is no need to adjust.
3.This model is an upgraded version of pneumatic electric twisting machine.
4.New automatic pulling device, simple operation, smooth twisting, more stable quality, especially for novice operation can quickly adapt.

Operation steps
1.Turn on the power supply
2.Turn on the air source and the twist clamp will open automatically
3.Put a bunch of stripped products into the automatic gripper, start the foot switch, the automatic gripper clamps the wire, the twisting head rotates, and the automatic pulling device retracts automatically. The manual only needs to hold the wire to complete the twisting action. At this time, release the foot switch.
4. Every time you start the foot switch, pause for 2-3 seconds, the twisting head stops rotating, the twisting clamp opens, and repeat the action after putting in the wire.
5.The backward speed of the automatic pulling device can be controlled by the switch in the upper right corner of the machine.