-
Flat Cable Stripping & Tearing Machine LJL508-PX2
Specification Drive way: Four Drivers Power Supply: AC220/110V 50HZ/60HZ Power Rating: 450W Available diameter: 0.1-8mm² Stripping length: Head 0-15mm, End 0-15mm Cutting Length: 01-150000mm(Determined on wire materials) Cutting Tolerance: ±(0.2+0.0002×L)mm (L=Cutting Length) The max width: 12P(mm²) / 80x25x2.5mm Processing Capacity: 8000-3000wires/hour Fitting Wire Material: flat cable, data cable, flat wire Drive Way: Two Wheel Drive At The Same Time Cut the middle of stripping: 13 Speed A... -
Heat-Shrinkable Tube Cutting Machine LJL508-QG
Model: LJL508-QG
Drive mode: Two drivers
Display:Full English LCD Display
Cutting length:5-9999mm
Appropriate wire stripping:PVC, heat-shrink tubes, electric wires
Blade Material:Hard tungsten steel
Stripper speed (Article / h):3000~7000pcs/hour -
Automatic Wire Stripping Machine LJL-508SD
Model: LJL-508SD
Cutting length: 1-9999mm
Stripping length: Head: 0-35, tail 0-15mm
Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3
Core cross-section cut-line: 0.1- 4.5mm² AWG12-AWG32# -
Wire Cutting & Stripping Machine LJL508-SDB2
Model: LJL508-SDB2
Wire Gauge Range: AWG16 – AWG32
four short two-lane model
Stripping length: End of a thread 0-35, line tail 0-15
Appropriate wire stripping: PVC, Teflon, glass and wire -
Double layers Round Jacket Cable Cutting and stripping machine LJL508-YHT2
Suitable inside cores: two, three, four, five inside cores
* Voltage:220V/110V 50/60HZ * Power:850W
* Diameter:3-13mm
* Display:7”LCD screen
* Dimension:62*55*49cm * Weight:100kg -
Multiple Hot Wire Stripping & Twisting Machine LJL-3FA
Model: LJL-3FA
Ability to peel twist 1~10strips/time
Stripping torque range AWG#18~#32 0.1~0.75m²
Minimum peel twist tength 3mm
Maximum peel twist tength 25mm
Stripping torque speed 120~30times/minute(adjustable) -
Pneumatic Wire Stripping Machine LJL-305
Model:LJL- LJL-305
Stripping Length 50mm
Stripping Capacity Max.5mm
Inlet Air Working Pressure 3-7 kg/cm²
Stripping Force 31-73kg
Capacity 40 -
Magnetic Pneumatic Wire Stripping Machine LJL-2015C
Model:LJL-2015C Cable cross section: 0.03 – 2.08 mm² (32 – 14 AWG) Max. cable outer diameter: 3.2 mm (0.12″) Stripping accuracy (whole strip): 0.5 mm Wire diameter accuracy: 0.01 mm (0.001″) Max. stripping length: 20 mm
-
Coaxial Cable Stripping Machine LJL-2040
Model:LJL-2040
Cable Type:coaxial-cable,tri-axial cable,shield wire,rigid cable
Max. Cable Dimater:AWG30-AWG4 (0.04-20mm2)
Blade:4 pieces Material:imported tungsten steel(Switzerland)
Productivity:1800-2000pcs/h(depend on the cable length and type) -
Semi-auto Coaxial Wire Stripping Machine LJL-6806D
Model: LJL-6806D
Coaxial wire stripping machine
Max Cable Diameter 1.5-9.5mm mm
Cutting depth 0.01mm
Max Peeling length 65mm
Easy operate -
Coaxial Wire Stripping Machine LJL-5806
Model: LJL-5806
Coaxial wire stripping machine
Max Cable Diameter 0.8-7mm
Cutting depth 0.01mm
Max Peeling length 54mm
Easy operate -
Wire stripping and bending machine LJL508-ZW25 25mm2 with four belt drivers
Model: LJL508-ZW25
Wire size:1-25mm2
Cutting length:max 5m
Stripping Length:Wire head: 0-30mm, wire tail: 0-20mm
Bending number:13 Times
