Our Products
Ultrasonic welding machine
Principle introduction
LJL-X20 series is a new generation of wire harness machine with strong structure and joint area up to 40mm2. Its lightweight and precise design is most suitable for non fixed working environment, that is, the same version of the harness machine can be used for desktop, plate or mobile harness machine, so it also reduces the cost of users. Advantages: small volume and light weight. The same type of wire harness machine has plate type and table type interchange function. The lower cost storage and spare parts welding section is from 0.2 square mm to 40 square mm. The operation is safe and stable. The automatic proofreading function is easy to maintain. The operation and replacement tools are simple, fast and safe. The structure is simple and precise, High operation safety, innovative installation system reduces the weight of equipment, and can communicate with multiple machines. The power supply is 2000W to 4000W.
Model: LJL-X2020
Frequency: 20K
Output power: 2000W
Supply voltage: 220 V, 50 / 60 Hz
Maximum current: 15A
Supply standard: 6.5bar (94 psi) clean, dry compressed air
Control form: Single Chip Microcomputer
Box size: 500 * 400 * 120mm
Frame size: 340 * 180 * 242mm
Maximum welding capacity: 16mm2
Model: LJL-X2030
Frequency: 20K
Output power: 3000W
Supply voltage: 220 V, 50 / 60 Hz
Maximum current: 15A
Supply standard: 6.5bar (94 psi) clean, dry compressed air
Control form: Single Chip Microcomputer
Box size: 500 * 400 * 120mm
Frame size: 340 * 180 * 242mm
Maximum welding capacity: 25mm2
Model: LJL-X2040
Frequency: 20K
Output power: 4000W
Supply voltage: 220 V, 50 / 60 Hz
Maximum current: 30A
Supply standard: 6.5bar (94 psi) clean, dry compressed air
Control form: Single Chip Microcomputer
Size of electric box: 550 * 420 * 220mm
Frame size: 470 * 220 * 262mm
Maximum welding capacity: 40mm2
High quality characteristics of the equipment system (technical characteristics of ultrasonic generator)
It can set time and power to ensure stable welding quality.
Limits of extended process control
The range of full vibration amplitude is 0-100% adjustable and provides constant power.
Over temperature protection
Over current protection
Overload protection
Real time automatic frequency adjustment with memory
Self diagnosis and display, sound alarm, logic electrical signal output (used to control other automation equipment)
Display the information of the fault location directly, so as to facilitate troubleshooting
International standardized interface RS485, which can be used for communication equipment with external PC
Digital delay trigger. Accurately control the time of ultrasonic wave to ensure the stability of welding.
Characteristics of wire harness welding machine
The section density of ultrasonic welding part is better and it is not easy to form cavity.
The resistance coefficient of ultrasonic welding is very low or close to zero, the conductivity is better, and the service durability is improved.
Ultrasonic welding will not produce heat accumulation, which will lead to local temperature rise, forming metal workpiece burning and other quality hazards.
Ultrasonic welding is less affected by external moisture, dust, oil and gas and other adverse factors, and it is not easy to produce adverse conditions such as corrosion and oxidation of metal parts, resulting in poor electrical conductivity
The degradation of signal transmission performance.
Ultrasonic welding for metal parts, after long-term use, will not cause the decline of electrical conductivity due to corrosion and oxidation of copper wire inside the welding point, resulting in functional failure.
Ultrasonic welding can minimize the temperature effect of the material (the temperature of the welding zone does not exceed 50% of the absolute melting temperature of the metal to be welded), so as not to change the metal structure,
So it is very suitable for welding application in electronic field.
Compared with resistance welding, ultrasonic welding has the advantages of long service life, less time of repair and replacement, and easy to realize automation.
Ultrasonic welding can be carried out between the same metal and different metals, which consumes much less energy than electrical welding.
Ultrasonic welding is the most advanced, convenient, environmental protection and energy-saving electrical connection technology
Low requirement for welding metal surface, oxidation or electroplating can be used for welding
Short welding time, without any flux, gas, solder
No spark, close to cold welding machine
The minimum requirement of preparation before welding can save labor
A simple process ends in one second.
Low cost investment and mold replacement cost
Lightweight ergonomic design, durable welding force, two shell
Easy to use:
The integrated system and constant welding parameters ensure the welding quality
There is no need for skilled workers, the use of equipment only needs one day of training
Mold replacement is simple and fast, no need to recalibrate, reduce downtime and production costs
Easy to install, maintain and operate
HOT-SALE PRODUCT
Quality First, Safety Guaranteed
