-
Coaxial Wire Stripping Machine LJL-5806
Model: LJL-5806
Coaxial wire stripping machine
Max Cable Diameter 0.8-7mm
Cutting depth 0.01mm
Max Peeling length 54mm
Easy operate -
Wire stripping and bending machine LJL508-ZW25 25mm2 with four belt drivers
Model: LJL508-ZW25
Wire size:1-25mm2
Cutting length:max 5m
Stripping Length:Wire head: 0-30mm, wire tail: 0-20mm
Bending number:13 Times -
Wire stripping and bending machine LJL508-ZW16 16mm2 with four drivers
Model: LJL508-ZW16
Wire size:1-16mm2
Cutting length:1-100mm
Stripping Length:Wire head: 0-20mm, wire tail: 0-20mm
Bending number:13 Times -
Fully automatic double sides terminal crimping machine LJL-S01
Model: LJL-S01
Cutting length：40mm~9900mm,(27mm customize)
Cutting speed：4200pcs/h ( within 100mm)
Processing efficiency：More than 3800pcs/h ( within 100mm)
Suitable wire size：AWG18#~30#: Standard Two wheel AWG14#-24#: Four wheel for thick wire -
Wire Cutting And Stripping Machine LJL508-MAX2 (25mm2) With Eight Drives
Model:LJL508-MAX2 (25mm2) EIGHT DRIVERS
Cut the middle of stripping: 16
Core cross-section cut-line: 0.5-25mm², if more than 25mm², please send your samples to us for testing, thanks.
Conduit diameter: Φ13 -
Ultrasonic wire-beam welding machine LJL-X20
Principle introduction Ultrasonic welding is the process of converting the current into electrical energy through an ultrasonic generator. The converted high-frequency electric energy is then converted to the same frequency through the transducer, which is transmitted to the weld head through a set of horn devices that can change the amplitude. The vibration energy received by the weld is transmitted to the connector of the piece to be welded. In this region, the vibrational energy is convert... -
Cable Wire Stripping Machine six drivers LJL508-MAX(25mm²)
Model: LJL508-MAX(25mm²) SIX DRIVERS
Display: Full English LCD Display
Cutting length: 1-150000mm
Stripping length: End of a thread 0-50 line tail 0-50
Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 -
Electrical Terminal Machine Plier Tool Cable Lug Crimping LJL-Y10
Product model: LJL-Y10
Comping range: 0.5-6.0 square mm
Pressure pressure range: 0.5-0.6Mpa
Air flow rate: 34L/Min
Output pressure: 1.3T
Dimensions: 230 * 187 * 100mm
Weight: 2KG -
LJL508-MAX(25mm²) Cable Wire Stripping Machine Four & six drivers
Specification of LJL508-MAX(25mm²) Cable Wire Stripping Machine Model: LJL508-MAX(25mm²) FOUR DRIVERS & SIX DRIVERS Power: AC220/ 50HZ 110V/60HZ Power: Rated 500W Display: Full English LCD Display Cutting length: 1-150000mm Stripping length: End of a thread 0-50 line tail 0-50 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: ±(0.002xL) mm or less Cut the middle of stripping: 13 Wire size: AWG5-AWG30# Core cross-section cut-line: 0.2– 25mm² Conduit diameter: Φ13 Ap... -
IDC Pneumatic cable Crimping machine LJL-YP
Model: LJL-YP
Depending on the product type, it can be pressed 300 to 600 times per hour
Use 6-8kg air pressure and 220V power supply.
It is suitable for crimping 8p-64p cable of IDC products -
Wire Stripping & Cutting Machine LJL508-JE2
Model: JL508-JE2 FOUR DRIVERS
Cutting length: 1-100000mm
Stripping length: End of a thread 0-50, line tail 0-50mm
Core cross-section cut-line: 0.2 – 10.0mm² (AWG10#-AWG32#)
Stripper speed (Article / h): L=100mm, 2000-5000pcs/h -
RJ Connector Crimping Machine LJL-GVY03
Model: LJL-03
Applicable RJ 4-10P
Operation Mode Single-Action
Work Mode 2 Gears / Pedal Switch / Micro Switch
Volume 360-154-262(MM)
