-
Wire harness tape wrapping machine LJL-303T
Tape width: 9-30mm Wire diameter: Ф3mm-25mm Winding length: 0-600mm/second Available Inside diameter of tape: Ф32 or Ф38 Available Outside diameter of tape: 110mm
-
Flat Cable Stripping & Tearing Machine LJL508-PX2
Specification Drive way: Four Drivers Power Supply: AC220/110V 50HZ/60HZ Power Rating: 450W Available diameter: 0.1-8mm² Stripping length: Head 0-15mm, End 0-15mm Cutting Length: 01-150000mm(Determined on wire materials) Cutting Tolerance: ±(0.2+0.0002×L)mm (L=Cutting Length) The max width: 12P(mm²) / 80x25x2.5mm Processing Capacity: 8000-3000wires/hour Fitting Wire Material: flat cable, data cable, flat wire Drive Way: Two Wheel Drive At The Same Time Cut the middle of stripping: 13 Speed A... -
Heat-Shrinkable Tube Cutting Machine LJL508-QG
Model: LJL508-QG
Drive mode: Two drivers
Display:Full English LCD Display
Cutting length:5-9999mm
Appropriate wire stripping:PVC, heat-shrink tubes, electric wires
Blade Material:Hard tungsten steel
Stripper speed (Article / h):3000~7000pcs/hour -
Automatic Wire Stripping Machine LJL-508SD
Model: LJL-508SD
Cutting length: 1-9999mm
Stripping length: Head: 0-35, tail 0-15mm
Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3
Core cross-section cut-line: 0.1- 4.5mm² AWG12-AWG32# -
Wire Cutting & Stripping Machine LJL508-SDB2
Model: LJL508-SDB2
Wire Gauge Range: AWG16 – AWG32
four short two-lane model
Stripping length: End of a thread 0-35, line tail 0-15
Appropriate wire stripping: PVC, Teflon, glass and wire -
Double layers Round Jacket Cable Cutting and stripping machine LJL508-YHT2
Suitable inside cores: two, three, four, five inside cores
* Voltage:220V/110V 50/60HZ * Power:850W
* Diameter:3-13mm
* Display:7”LCD screen
* Dimension:62*55*49cm * Weight:100kg -
Desktop wire taping machine LJL-35T
Model:LJL-35T (8-35MM) LJL-55S (20-55MM)
Winding speed:150-400 r.p.m/minute
Available tape:Width 10-25MM;Outside diameter less than 110mm, Inside diameter: customized. -
Hand-held Wire Winding Taping Machine LJL-S35A
Model:LJL-35A (8-35MM) LJL-55 (20-55MM)
Winding speed：180-400 Turn/Min
Tape size：Width 10-25MM；OD≤110M ；ID: Customized
Tape material:PVC, cloth, felt -
Wire harness wrap around labeling machine LJL-1182
Model: LJL-1182
Speed: 1500PCS/H (Depends on label size and manual operation speed)
Applicable label length:20-100mm(can be customized )
Applicable label width:5-45mm(can be customized )
Maximum label roll O.D:240mm
Maximum label roll I.D:76mm
Applicable wire diameter:3-12mm -
Wire harness tape wrapping machine LJL-303X
Model:LJL-303X
Width:5-25mm(can customized as request.)
Length:0-600mm/second
Diameter:Ф30mm OEM CE
Available Inside diameter of tape:Standard is Ф37, (Can chooseФ32) -
Automatic tape wrapping machine LJL-303K
Model: LJL-303K
Wire pulling length:1,050mm ((longer can be customized)
Tape width: 5-25mm (other sizes need to be customized)
Tape inner hole size: Ф37，Ф32
Host speed (ret/min): 300-2,500 continuously adjustable -
Automatic axial taping wire machine for automobile wire harness-LJL-50J
Model: LJL-50J
Speed:3000pcs/h
Tape length: 50-99mm
Tape width: 25-40mm
Air pressure: 0.5-0.6mpa
