News

The automatic wire stripping machine is currently a very popular wire harness processing equipment, with complete functions and many processing methods, such as cutting, stripping, half stripping, intermediate stripping,
Some functions such as wire twisting can be realized. -The multi-purpose automatic wire stripping machine can be said to be a good helper for wire harness processing. Is it difficult to operate this automatic wire stripping machine?

How to prepare for operation during the use of the wire stripping machine?
1. Before using the automatic wire stripping machine

• Before the operation, the operating staff strictly follow the inspection system of this type of equipment to conduct inspections and make records;
• Before starting the machine, you must check whether the accessories of the machine are installed correctly and confirm that there is no problem before starting the machine.
• Confirm that the cutting die is in good condition, is installed reliably, and has good lubrication;

2. When the automatic wire stripping machine is used

• According to the requirements of the process documents, the stripping length of the cable, the stripping length of the core wire, adjust the position of the upper and lower (left and right) cutters, check whether the compressed air supply is normal, and adjust the air cylinder
• Flow, plug in the power supply, and use the foot switch to control the device to start running.
• After cutting a few pieces, check the length of the product and the quality of the core wire to ensure that it conforms to the process documents. After checking the product table, start the continuous production normally.
• Terminal machine
• During the stripping process, your hands should not enter the inside of the protective cover to prevent the machine from hurting people.
• When the machine is stopped midway, please unplug the power plug so that people leave and the machine is powered off to prevent others from accidentally stepping on the foot switch and causing pinch injuries.
• If you need to replace the stripping blade, you must first cut off the power and 5 gas before you can replace it.
• If an abnormal situation is found during use, the power should be cut off immediately, and the professional maintenance personnel should be notified for maintenance.
• When working, the operator must be concentrated, and it is strictly forbidden to do anything unrelated to production.

3. After the automatic wire stripping machine is used

• After the production plan is executed, the power supply of the equipment should be turned off;
• Turn off the main power supply of the equipment before leaving get off work, and clean the machine and surrounding areas for sanitation.