-
Flat Cable Stripping & Tearing Machine LJL508-PX2
Specification Drive way: Four Drivers Power Supply: AC220/110V 50HZ/60HZ Power Rating: 450W Available diameter: 0.1-8mm² Stripping length: Head 0-15mm, End 0-15mm Cutting Length: 01-150000mm(Determined on wire materials) Cutting Tolerance: ±(0.2+0.0002×L)mm (L=Cutting Length) The max width: 12P(mm²) / 80x25x2.5mm Processing Capacity: 8000-3000wires/hour Fitting Wire Material: flat cable, data cable, flat wire Drive Way: Two Wheel Drive At The Same Time Cut the middle of stripping: 13 Speed A... -
Heat-Shrinkable Tube Cutting Machine LJL508-QG
Model: LJL508-QG
Drive mode: Two drivers
Display:Full English LCD Display
Cutting length:5-9999mm
Appropriate wire stripping:PVC, heat-shrink tubes, electric wires
Blade Material:Hard tungsten steel
Stripper speed (Article / h):3000~7000pcs/hour -
Automatic Wire Stripping Machine LJL-508SD
Model: LJL-508SD
Cutting length: 1-9999mm
Stripping length: Head: 0-35, tail 0-15mm
Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3
Core cross-section cut-line: 0.1- 4.5mm² AWG12-AWG32# -
Wire Cutting & Stripping Machine LJL508-SDB2
Model: LJL508-SDB2
Wire Gauge Range: AWG16 – AWG32
four short two-lane model
Stripping length: End of a thread 0-35, line tail 0-15
Appropriate wire stripping: PVC, Teflon, glass and wire -
Double layers Round Jacket Cable Cutting and stripping machine LJL508-YHT2
Suitable inside cores: two, three, four, five inside cores
* Voltage:220V/110V 50/60HZ * Power:850W
* Diameter:3-13mm
* Display:7”LCD screen
* Dimension:62*55*49cm * Weight:100kg -
Wire Cutting And Stripping Machine LJL508-MAX2 (25mm2) With Eight Drives
Model:LJL508-MAX2 (25mm2) EIGHT DRIVERS
Cut the middle of stripping: 16
Core cross-section cut-line: 0.5-25mm², if more than 25mm², please send your samples to us for testing, thanks.
Conduit diameter: Φ13 -
Cable Wire Stripping Machine six drivers LJL508-MAX(25mm²)
Model: LJL508-MAX(25mm²) SIX DRIVERS
Display: Full English LCD Display
Cutting length: 1-150000mm
Stripping length: End of a thread 0-50 line tail 0-50
Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 -
LJL508-MAX(25mm²) Cable Wire Stripping Machine Four & six drivers
Specification of LJL508-MAX(25mm²) Cable Wire Stripping Machine Model: LJL508-MAX(25mm²) FOUR DRIVERS & SIX DRIVERS Power: AC220/ 50HZ 110V/60HZ Power: Rated 500W Display: Full English LCD Display Cutting length: 1-150000mm Stripping length: End of a thread 0-50 line tail 0-50 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: ±(0.002xL) mm or less Cut the middle of stripping: 13 Wire size: AWG5-AWG30# Core cross-section cut-line: 0.2– 25mm² Conduit diameter: Φ13 Ap... -
Wire Stripping & Cutting Machine LJL508-JE2
Model: JL508-JE2 FOUR DRIVERS
Cutting length: 1-100000mm
Stripping length: End of a thread 0-50, line tail 0-50mm
Core cross-section cut-line: 0.2 – 10.0mm² (AWG10#-AWG32#)
Stripper speed (Article / h): L=100mm, 2000-5000pcs/h -
Wire Stripping & Cutting Machine LJL508-JE
Model: LJL508-JE FOUR DRIVERS
Power: AC220/ 50HZ 110V/60HZ
Power: Rated 220W
Display: Full English LCD Display
Cutting length: 1-9999mm
Stripping length: End of a thread 0-50, line tail 0-50 -
Automatic Jacketed Cable Stripping Machine LJL508-HT2
Model: LJL508-HT2
Wire Size: AWG10-32#
Fitting Wire Section Acreage: 0.2-10mm²( AWG8#-AWG32#)
Guide Pipe Diameter (Wire DIA.): ￠13
Stripping Length: Head: 0-200mm End: 0-150mm
Speed: L=100MM, 200-5000pcs/h -
Wire Stripping Machine LJL-508E
Model: LJL-508E
Cutting length: 1-9999mm
Stripping length: End of a thread 0-35, line tail 0-15
Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3
Core cross-section cut-line: 0.2 – 8.0mm²
wire range: 0.1-8mm2 (AWG8#-AWG32#).
